Release Agent for Fusible Interlining
 |
| An agent for releasing fusible interlining that has been adhered
in the incorrect position. |
 |
 FUSE-OUT just sprays on. After which, fusible interlining can be simply
peeled off.
Light resin stains permeated on the surface of cloth can also be removed
with FUSE-OUT.
As FUSE-OUT is clear and colorless, there is no risk of damage to cloth. |
|
DIRECTIONS
FOR
USE
 |
- 1.Spray FUSE-OUT on the fusible interlining side and wait 10 to 30 seconds.
Then peel off the fusible interlining.
- 2.If the interlining does not peel off easily,Lightly work the interlining
with the hands,then peel it away.
- * Dots from the fusible interlining may remain on the cloth; however,since
the resin has been softened, these can be removed by rubbing the cloth
with velvet or other napped material.
|
*Before use, first test on cloth whose dye will run easily.
*Do not use with nylon-or acrylic-based cloth.
*Not effective against some types of adhesives, such as polyethylene resins,polyvinylchloride.
*Fuse-out contains organic solvents. Make sure that the workplace is sufficiently ventilated when applying Fuse-out in large amounts.
*Fuse-out contains no solvents or gas that will cause damage to the ozone layer. |
|
Q & A
|
» page2 |
|
|
| Inquiry |
export@mizho-c.jp |
 |
